ABSTRACT
Animal bones (cow), clay, feldspar and quartz where used to simulate the production of human teeth. The animal bones also referred to as hydroxyapatite sample was collected from an abattoir in Amansea, Anambra state, Nigeria. It was fired, calcined, crushed and sieved then used as one of the major constituent to fabricate various dental samples. The kankara clay sample was collected from Kastina state while quartz and feldspar were obtained from kogi state. The dental samples were produced by slip casting method using Plaster of Paris (P.O.P) mould. The specimens produced were to be fired at 1200ᵒC and relevant parameters: shrinkage (%), density (g/ml), porosity (%), water absorption (%), strength kg/cm2 and even chemical analysis of product samples were to be determined. Unfortunately, due to the epileptic power supply in Projects’ Development Institute (PRODA), the above targets were not met because for quite some months, no electric supply has lasted beyond one good hour.